Variables and Arithmetic Expressions in C

The next program uses the formula °C=(5/9)(°F-32) to print the folllowing table of Farenheit temperatures and their centigrade or Celsius equivalents:

0	-17
20	-6
40	4
60	15
80	26
100	37
120	48
140	60
160	71
180	82
200	93
220	104
240	115
260	126
280	137
300	148

The program itself still comnsists of the definition of a single function named main. It is longer than the one that printed "hello world", but not complicated. It introduces several new ideas, including comments, declarations, variables, arithmetic expressions, loops and formatted output.

/*print farenheit-celsius table
for fahr=0,20,....,300*/
using namespace std;
int main()
{
    int fahr, celsius;
    int lower, upper, step;
    lower=0;
    upper=300;
    step=20;
    fahr=lower;
    printf("°C\t°F\n");
    while(fahr<=upper)
    {
        celsius=5*(fahr-32)/9;
        printf("%d\t%d\n",fahr,celsius);
        fahr=fahr+step;              
    }
}

the two lines:

/*print farenheit-celsius table
for fahr=0,20,....,300*/

are a comment,which in this case explains briefly what the program does. Any characters between /* and */ are ignored by the compiler; they may be used freely to make a program easier to understand. Comments may appear anywhere where a blank, tab or newline can. In C, all variables must be declared before they are used, usually at the beginning of the function before any executable statements. A declaration announces the properties of variables; it consists of a name and a list of variables, such as:

int fahr, celsius;
int lower, upper, step;

The type int means that the variables listed are integers; by contrast with float, which means floating point, i.e., numbers that have a fractional part. The range of both int and float depends on the machine you are using; 16-bits ints, which lie between -32768 and +32767, are common, as are 32-bit ints. A float number is typically a 32-bit quantity, with at least six significant digits and magnitude generally between about 10^-38and 10³⁸. C provides several other data types besides int and float, including:

char	character - a single byte
short	short integer
long	long integer
double	double-precision floating point

The size of these objects is also machine-dependent. There are also arrays, structures and unions of these basic types, pointers to them, and functions that return them. Computation in the temperature conversion program begins with the assignment statements:

lower=0;
upper=300;
step=20;

which set the variables to their initial values. Individual statements are terminated by semicolons. Each line of the tabñe is computed the same way, so we use a loop that repeats one per outputline;this is the purpose of the while loop

while(fahr<=upper)
{
.........
}

The while loop operates as follows: The condition in parentheses is tested. If it is true (fahr is less than or equal to upper), the body of the loop(the three statements enclosed in braces) is executed. Then the condition is re-tested, and if true, the body is executed again. When the test becomes false(fahr exceeds upper) the loop ends, and execution continues at the statement that follows the loop. There are no further statements in this program, so it terminates. The body of a while can be one or more statements enclosed in braces, as in the temperature converter, or a single statement withouth braces, as in

while(i< j)
   i=2*i;

In either case, we will always indent the statements controlled by the while by one tab stop(which we have shown as four spaces)so you can see at a glance which statements are inside the loop. The indentation emphasizes the logical structure of the program. Although C compilers do not care about how a program looks, proper indentation and spacing are critical in making programs easy for people to read. We recommend writing only one statement per line, and using blank around operators to clarify grouping. The position of braces is less important, although people hold passionate beliefs. We have chosen one of several popular styles. Pick a style that suits you, then use it consistenly. Most of the work gets done in the body of the loop. The Celsius temperature is computed and assigned to the variable celsius by the statement

celsius=5*(fahr-32)/9

The reason for multiplying by 5 and dividing by 9 instead of just multiplying by 5/9 is that in C, as in many other languages, integer division truncates: any fractional part is discarded. Since 5 and 9 are integers. 5/9 would be truncated to zero and so all the Celsius temperatures would be reported as zero. This example also shows a bit more of how printf works. printf is a general purpose output formatting function.Its first argument is a string of characters to be printed, with each % indicating where one of the other(second,third,....) arguments is to be substituted, and in what form it is to be printed. For instance, %d specifies an integer argument, so the statement:

printf("%d\t%d\n",fahr,celsius);

causes the values of the two integers fahr and celsius to be printed, with a tab(\t) between them. Each % construction in the first argument of printf is paired with the corresponding second argument, third argument, etc.;they must match up properly by number and type, or you will get wrong answers. By the way, printf is not part of the C language; there is no input or output defined in C itself. printf is just a useful from the standar library of functions that are normally accessible to C programs. The behaviour of printf is defined in the ANSI standard, however, so its properties should be the same with any compiler and library that conforms to the standard. There are a couple of problems with the temperature conversion program. The simpler one is that the output isn't very pretty because the numbers are not right-justified. That's easy to fix; if we augment each %d in the printf statement with a width, the numbers printed will be right justified in their fields, For instance, we might say:

printf("%3d %6d\n",fahr,celsius);

to print the first number of each line in a field three digits wide, and the second in a field six digits wide, like this:

The more serious problem is that because we have used integer arithmetic, the Celsius temperatures are not very accurate; for instance, 0°F is actually about -17.8°C, not -17. To get more accurate answers, we should use floating-point arithmetic instead of integer. This requires some changes in the program. Here is the second version:

int main()
{
    int fahr, celsius;
    int lower, upper, step;
    lower=0;
    upper=300;
    step=20;
    fahr=lower;
    printf("°C\t°F\n");
    while(fahr<=upper)
    {
        celsius=5*(fahr-32)/9;
        printf("%3d %6d\n",fahr,celsius);
        fahr=fahr+step;              
    }
}

This is much the same as before, except that fahr and celsius are declared to be float and the formula for conversion is written in a more natural way. We were unable to use 5/9 in the previous versions because integer division would truncate it to zero. A decimal point in a constant indicates that it is floating point, however, so 5.0/9.0 is not truncated because it is the ratio of two floating-point values. If an arithmetic operator has integer operands, an integer operation is performed. If an arithmetic operator has one floating-point operand and one integer operand, however, the integer will be converted to floating point before the operation is done. If we had written(fahr-32), the 32 would be automatically converted to floating point. Nevertheless, writing floating-point constants with explicit decimal points even when they have integral values emphasizes their floating-point nature for human readers. For now, notice that the assignment

fahr=lower;

and the test

while(fahr<=upper)

also work in the natural way the int is converted to float before the operation is done. The printf conversion specification %3.0f says that a floating-point number(here fahr) is to be printed at least three characters wide, with no decimal point and no fraction digits. %6.1f describes another number(celsius) that is to be printed at least six characters wide, with 1 digit after the decimal point. The output looks like this:

With and precision may be omitted from a specification: %6f says that the number is to be at least six characters wide; %.2f specifies two characters after the decimal point, but the width is not constrained; and %f merely says to print the number as floating point:

%d	print as decimal integer
%6d	print as decimal integer, at least 6 characters wide
%f	print as floating point
%6f	print as floating point, at least 6 characters wide
%.2f	print as floating point, 2 characters after decimal point
%6.2f	print as floating point, at least 6 wide and 2 after decimal point

Among others, printf also recognizes %o for octal, %x for hexadecimal, %c for character, %s for character string and %% for itself.

This Sample was taken from The C Programming Language by Brian Kernighan and Dennis Ritchie